| LOAD CELL SIGNAL CONDITIONER - 255SC |
click on image to zoom
 |
IEICOS Load Cell Signal Conditioners are also available with built-in instrumentation amplifiers and analog output options as mentioned above for use with PC Based systems, Process control equipments, research and laboratory applications. These signal conditioners have built-in excitation supply for the load cells, operate on mains or battery supply and are available in single and multichannel configurations. These do not have any displays. The signal conditioners are available as desktop top type units. Also available rack mountable units, VME, PCI size units on request.
Performance Specification :
| Model |
: |
255SC |
| Channel |
: |
Single, Two, Three, Four, Five, Ten, Multichannel as required |
| Display |
: |
No Display |
| Range |
: |
Calibrated to range of load cell |
| Accuracy |
: |
< +/-0.2% full scale |
| Linearity |
: |
+/- 0.1% of Full scale |
| Input Options |
: |
Load Cell input |
| Load Cell Excitation |
: |
10 V DC Nominal (built-in) |
| Operating Temperature Range |
: |
10 to 50°C |
| Thermal Drift |
: |
- 250 ppm/°C (nominal) |
| Analog Output Options |
: |
- DC mV output, 0 to 1V, 0 to 5V, 0 to 10 V,
-1V to 1 V, -5V to + 5V, -10V to 10V,
4 to 20 mA (any one – please choose) |
| Power Options |
: |
230 V/110V, 50 Hz/60 Hz,
Battery Operated, Rechargeable Battery Operated or as per your requirement . |
| Remote Display |
: |
Option available |
| Dimensions |
: |
60 H x 80W x 100L (nominal - standard) - or as per your requirement |
| Weight |
: |
150 gms (nominal) - depends on options |
|
|
