::: IEICOS | Industrial Engineering Instruments :::

Laboratory Equipments › Mechanical / Industrial Engineering<Back

1(a) IEICOS DRILL TOOL DYNAMOMETER MODEL 600 Series

IEICOS |Mechanical / Industrial Engineering

click on image to zoom

Drill tool dynamometer for measurement of both the thrust force of the control and the torque produced on the work piece. Used to establish drilling force, study tool configuration and lubricant characteristics. This can be bolted directly, as slots are provided to attach vise or fixture on both top and bottom flanges. The instrument is complete in sealed construction.

Specifications :

Force	:	Torque and Thrust.
Range of force	:
For smaller drilling machines with ½ inch bolt mounting slot
Model 600A	:	100kg. Thrust 10 kgm. Torque
Model 600B	:	200kg.Thrust 10 kgm. Torque.
Model 600C	:	500kg.Thrust 20 kgm. Torque
For larger drilling machines with ½ inch bolt mounting slot
Model 601A	:	100kg. Thrust 10 kgm. Torque
Model 601B	:	200kg.Thrust 10 kgm. Torque
Model 601C	:	500kg.Thrust 20 kgm. Torque
Sensor	:	4 arm bonded strain gauge component bridge for each force.
Bridge resistance	:	350 ohms typical.
Bridge Voltage	:	12 Volts Max
Linearity	:	± 1% of full scale.
Accuracy	:	± 1% of full scale
Additional Facility	:	Self centering vise 3” size to hold the Specimen