|
The grinding tool dynamometer can be mounted on a table of the grinding machine and any component being ground can be fixed over the dynamometer. Slots are provided to fix the dynamometer to the grinding machine. Holes have been provided on the grinding dynamometer to enable any type of component be fixed on it. Output terminals are provided for the force in X Y Z direction acting on the work piece.
Specifications:
| Force |
: |
XYZ DIrection |
| Range of force |
: |
|
| For 12.5mm tool bits |
| Model 610A |
: |
100kg. force in XYZ direction |
| Model 610B |
: |
200kg. force in XYZ direction |
| Model 610C |
: |
500kg. force in XYZ direction |
| Model 630D |
: |
200 Kg. Force (X) & Thrust (Y); 20Kg. Torque for Vertical Milling. |
| Sensor |
: |
4 arm bonded strain gauge component bridge for each force. |
| Bridge resistance |
: |
350 ohms typical. |
| Bridge Voltage |
: |
12 Volts Max |
| Linearity |
: |
± 1% of full scale. |
| Accuracy |
: |
± 1% of full scale |
| Mounting |
: |
using slots provided |
| Additional Facility |
: |
Self centering vice 3” size to hold the specimen. |
|
