::: IEICOS | Industrial Engineering Instruments :::

Laboratory Equipments › Mechanical / Industrial Engineering<Back

3(a) IEICOS MILLING TOOL DYNAMOMETER MODEL 630 Series

IEICOS |Mechanical / Industrial Engineering

click on image to zoom

The milling tool dynamometer can be mounted on the table of the milling machine and any component to be milled can be fixed over the dynamometer. Slots are provided to mount the dynamometer to the milling machine. Holes have been provided on the milling dynamometer to enable any type of component to be fixed on it. The output terminals are provided for the force in XYZ direction acting on the working piece.

Specifications:

Force	:	XYZ DIrection
Range of force	:
For 12.5mm tool bits
Model 630A	:	100kg. force in XYZ direction
Model 630B	:	200kg. force in XYZ direction
Model 630C	:	500kg. force in XYZ direction
Model 630D	:	200 Kg. Force (X) & Thrust (Y); 20Kg. Torque for Vertical Milling.
Sensor	:	4 arm bonded strain gauge component bridge for each force.
Bridge resistance	:	350 ohms typical.
Bridge Voltage	:	12 Volts Max
Linearity	:	± 1% of full scale.
Accuracy	:	± 1% of full scale
Mounting	:	using slots provided
Additional Facility	:	Self centering vice 3” size to hold the specimen.