::: IEICOS | Industrial Engineering Instruments :::

Laboratory Equipments › Mechanical / Industrial Engineering<Back

2(a) IEICOS LATHE TOOL DYNAMOMETER MODEL 620 Series

IEICOS |Mechanical / Industrial Engineering

click on image to zoom

The Lathe Tool Dynamometer has been designed so that it can be directly fixed on to the tool post using the hole provided on the dynamometer. The dynamometer can measure 3 forces in mutually perpendicular directions, i.e. horizontal, vertical and thrust, and is provided with 3 connector sockets.

Specifications:

Force	:	XYZ DIrection
Range of force	:
For 12.5mm tool bits
Model 620A	:	100kg. force in XYZ direction
Model 620B	:	200kg. force in XYZ direction
Model 620C	:	500kg. force in XYZ direction
For 25mm tool bits
Model 621A	:	100kg. force in XYZ direction
Model 621B	:	200kg. force in XYZ direction
Model 621C	:	500kg. force in XYZ direction
Sensor	:	4 arm bonded strain gauge component bridge for each force.
Bridge resistance	:	350 ohms typical.
Bridge Voltage	:	12 Volts Max
Linearity	:	± 1% of full scale.
Accuracy	:	± 1% of full scale
Tool post dia	:	20mm (any other size required to be indicated)
Center height	:	To be indicated.